(2) There shall be furnished in connection with an application for the
registration of a design to be applied to a set of articles four identical
representations of the design, in a form satisfactory to the Registrar, or
four specimens.
(3) The representations of the design to be applied to a set of articles
shall show the design as applied to each different article included in the
set.
Preparation of
7. (1) Each representation of the design, whether to be applied to a
representations
single article or to a set of articles, shall be upon paper of the size
prescribed by regulation 35 and not on cardboard and shall appear on
one side only of the paper. The figure or figures shall be placed in an
upright position on the sheet. When more figures than one are shown,
these shall where possible be on one and the same sheet, and each shall
be designated perspective view, front view, side view, plan or otherwise,
as the case may be.
(2) When the representations furnished are drawings or tracings, they
shall be in ink, and if on tracing cloth or tracing paper shall be mounted
on paper of the size prescribed by regulation 35.
(3) Where words, letters or numerals appear in the design but are not of
the essence of the design, they shall be removed from the
representations or specimens; where they are of the essence of the
design, the Registrar may require the insertion of a disclaimer of any
right to their exclusive use.
(4) Each representation of a design which consists of a repeating surface
pattern shall show the complete pattern and a sufficient portion of the
repeat in length and width, and shall not be of less size than 7 inches by
5 inches.
8. When specimens are furnished and are not, in the Registrar's
opinion, of a kind which can be conveniently mounted in a flat position
by means of an adhesive upon paper, or by stitching on linen-backed
sheets of paper of the size prescribed by regulation 35 and stored
without damage to other documents, representations shall be furnished
in place of specimens.

In certain cases
representations
to be furnished
in place of
specimens

Select target paragraph3